Post catcher

1.

7.

1. Place lip (handle) 2. on the postcatcher 7. and attach fixation part 3.
2. Push the inside clips with pin 4. on both sides of the postcatcher trough the holes as seen on the drawing. Push the outside clip with hole 5. on top of the inside clip with pin 4.
3. Fix the hook 1. on 40-50mm above the indoor letterbox / mailslot using the screws 6.
4. Unscrew the 2 screws at the bottom of the mailslot and slide the postcatcher under the mailslot. (Loosen top screws for extra space when needed)
5. Re-screw the screws (including top screws)
6. The postcatcher is ready to use when you place the lip 2. over the hook 1.