Draught excluder Secure

Fixation instructions deco strip with plastic cover and side caps.

  1. Measure the width of the door.
  2. Saw off the profile on the doorwidth. (minus 1 cm when side caps are applied)
  3. fix the profile with the screws that come with the product. Place one side cap and cut the plastic decorative strip at the appropiate size.
  4. Put the decoration strip under the top ridge of the profile. Then place decoration strip at the bottom of the profile in one corner and slide with a fingernail along the profile to push the decoration strip in.
  5. Finally place the other side cap.
Draught excluder Secure
Draught excluder Secure
Draught excluder Secure

Fixation instructions deco strip with steel cover and side caps.

  1. Measure the width of the door.
  2. Saw off the profile on the doorwidth. (minus 1 cm when side caps are applied)
  3. fix the screw with the screws that come with the product. Place one side cap and cut the steel decorative strip at the appropiate size.
  4. Put the decoration strip over the top ridge of the profile. Then place decoration strip at the bottom of the profile in one corner and push along the profile to push the decoration strip around it.
  5. Finally place the other side cap.